Selecting a Replacement Belt For Treadmill Damages
Your walking belt for treadmill is more delicate because it is more exposed to contact and therefore prone to damage. This article explains the general pointers in doing a check up on the belt as well as how to replace it. How do you check signs of damages?
The two most important parts of the treadmill are the belt and the deck. If the belt is not properly taken cared of, the deck’s mechanical operation will also get affected.
Maintain your treadmill belt with lubricants especially if you run on it everyday. You will know if your belt needs replacement if you notice these items.
- When it curls on its edges.
- The treadmill speed slows down when you step onto the deck.
- When obvious grooves appear on your treadmill belt.
Generally if the walking surface area of your belt for treadmill looks worn out, you may need to replace the belt. Otherwise, it may only need lubrication or waxing to keep it functional.
If one or two signs of damages are present, you may have to replace your belt. If you do not have the instruction manual, here are the basic instructions.
Removing the belt
- The very first important thing you do is to pull out the plug. Make sure your treadmill is not connected to a power supply.
- Find the hood of the treadmill′s motor and remove it.
- Loosen and remove the screws on both sides to take out the rear roller. These are the same screws affecting the tension of the belt.
- The same procedure applies to the front roller. Incline the board if the screws are not accessible.
- Once the screws are removed, you can now take out the front and rear rollers.
- Remove the belt.
Replacing the belt for treadmill
- The belt and the deck must be laid together side-by-side. Slide the belt over the deck and align.
- Install the rollers and fasten the deck to the frame properly and securely.
- With the screws, fasten the belt and deck together. You may need to adjust the deck to get the screws in.
- Slide the belt in through the rear roller by pulling it to the rear end.
- Tighten the screws a bit to hold the parts together.
- Replace the drive motor belt over the drive gear by sliding the front roller inside the belt.
- Make sure the belt fits snuggly to the deck by tightening the front and rear screws.
- Now that you have the new belt in place, you may need to adjust it. The adjustment concept is done by changing the speed to test the tightness and feel of your belt.
The process may sound simple but if you haven’t done this before, it’s best not to do it yourself. Seek help from someone who has more experience in replacing a belt for treadmill.
Tags: belt for treadmill, Fitness Equipment, health, Product Reviews, wellness
Leave a Reply
You must be logged in to post a comment.
